|
Post by rhyds on Oct 10, 2015 13:53:00 GMT 1
All sorted. I never did work out the dimples in the end, and simply refitted the pipe in such a way as it gave maximum clearance around the engine and radiator (one way seemed to pull the pipe too close to the aircon compressor). The breather hose came off after some judicious slicing, and I gave the PCV valve a quick blast of carb cleaner to shift the worst of the gunge. The old breather was clearly holed and perishing.
|
|
|
Post by Karl on Oct 10, 2015 14:54:29 GMT 1
Fingers crossed no more leaks !
|
|
|
Post by rhyds on Oct 10, 2015 15:06:07 GMT 1
Well its held all the way up to the rad fan coming on, so, touch wood, all should be well.
TBH the hose weep could have been left, but considering I needed to do the breather, it was a no-brainer to do both jobs at once.
|
|