|
|
Post by chippie on Apr 29, 2024 18:02:07 GMT 1
Had some spare time in between messing with cars… So I made this…..any ideas? Attachments:
|
|
remmington
Apprentice
Owns Spark Eroder
Posts: 4,974
|
Guess….
Apr 29, 2024 18:13:24 GMT 1
Post by remmington on Apr 29, 2024 18:13:24 GMT 1
Had some spare time in between messing with cars… So I made this…..any ideas? 24mm deep sensor socket |
|
|
|
Post by chippie on Apr 29, 2024 18:29:11 GMT 1
Yeah! Give that man a cigar….  Could have done with it on Saturday when I took the pressure sw off the tiguan… You never know, might come in hand again….  |
|
|
|
Post by valhalla on Apr 29, 2024 21:12:45 GMT 1
How did you produce the internal hex-form? It's very good!
I'm guessing you used a small-diameter end-mill, but you maybe have a shaper?
|
|
|
|
Post by chippie on Apr 29, 2024 21:33:10 GMT 1
No shaper, just used a small diameter end mill..3mm The 1/2” drive end done the same way using my dividing head on the mill.
It’s only aluminium, good enough for pressure switches…where high torque isn’t needed.
|
|
