remmington
Apprentice
Owns Spark Eroder
Posts: 4,966
|
Post by remmington on Apr 12, 2023 19:59:05 GMT 1
  Bought a trolley for my TIG welder - £147 delivered. Real pleased with it - could not make one for the money. I might use it bit more now - I can just wheel it out and use it. |
|
|
|
Post by OldGit on Apr 12, 2023 20:14:50 GMT 1
That's a nice bit of kit! you've just reminded me I need to make a Nitrogen bottle trolley before 'aircon season' properly kicks in....
|
|
|
|
Post by chippie on Apr 12, 2023 20:46:54 GMT 1
Looks a real nice piece of kit….👍 Great looking workshop too..l could work there if I lived nearer and was a few yrs younger…  if you’d have me…that is. |
|
|
|
Post by OldGit on Apr 14, 2023 20:26:00 GMT 1
What's the sign say on the blue door at the back? 'Fire Exit Keep .....' On the plus side, I've found where you left your tape measure  Looks a nice little home from home.
|
|
|
|
Post by valhalla on Apr 14, 2023 23:20:00 GMT 1
It's nice and cosy, you've got a fair bit packed in there. Anyway, it's tidier than my pad!!  I'm utterly ashamed of the state that my workshop has got-to recently. It doesn't help that Mrs. V has planted the loadbed-framework for her project on my rear ramps, then proceeded to fill around that with some of the Mini spares that came with the project. It wouldn't be so bad, but I need those ramps for the Disco TD5 transmision-job that is way, way overdue (I don't think I'm going to get the surcharge back on the old torque convertor now, so that's another several hundred quid down the pan, as the torque-convertor to go in was delivered in November last year...  ).
I used to have my exhaust clamps all racked nicely like that, then I did what I always do; rearrange the furniture until I no longer have room for the consumables - but the electrical stuff is getting better these days!
|
|
if you’d have me…that is.
I'm utterly ashamed of the state that my workshop has got-to recently. It doesn't help that Mrs. V has planted the loadbed-framework for her project on my rear ramps, then proceeded to fill around that with some of the Mini spares that came with the project. It wouldn't be so bad, but I need those ramps for the Disco TD5 transmision-job that is way, way overdue (I don't think I'm going to get the surcharge back on the old torque convertor now, so that's another several hundred quid down the pan, as the torque-convertor to go in was delivered in November last year... 
).