|
|
Post by den9112 on Mar 25, 2023 21:21:24 GMT 1
Attachment DeletedHi I have a suzuki swift booster jet 2018 that I am salvaging parts from. I have had difficulty today trying to remove the rear hub bearing assembly I eventually got it off but the back plate also came with it,this looks like its siezed on with rust and I was hoping for some tips on removing it from the backplate ...any help would be appreciated thanks.I can add a photo if I can work out hiw to post one .
|
|
|
|
Post by OldGit on Mar 25, 2023 21:32:25 GMT 1
It depends on which bit you want to keep - if both, put in a bucket with diesel & petrol for a few days, if just the hub, then heat the backplate.
|
|
|
|
Post by den9112 on Mar 25, 2023 21:39:38 GMT 1
Thanks for the reply,i would like to try and keep both but the bearing is more important to me ..
|
|
|
|
Post by OldGit on Mar 25, 2023 22:22:15 GMT 1
Then soak it in petrol & diesel in a bucket for a few days, get a broad chisel and blunt the end on a grinder, then place it as close to the hub as you can and tap all round, as soon as you start getting a gap, work either side of it to release the backplate.
|
|
|
|
Post by den9112 on Mar 25, 2023 22:43:43 GMT 1
Thanks,looks like its one of those patience and time jobs ...
|
|
