|
Post by icecosta on Jul 31, 2022 21:57:29 GMT 1
|
|
|
Post by chippie on Aug 2, 2022 15:25:24 GMT 1
Firstly, you need to remove the oil pressure switch, assuming you have one…then determine what thread it is…Probably 1/8 bsp….but could be anything…..
Having determined what that is, you need to ask the seller what the thread is on the oil pressure sender in his kit….it doesn’t say in the description…( very helpful…not!…apart from the 1/2” dimension.).
Having that information, you can go shopping for a suitable Tee piece….
Don’t forget to seal the connections to make oil tight….or you could be running out of oil pretty soon…..
|
|