|
|
Post by djones30164 on Aug 25, 2021 15:02:27 GMT 1
Hi wondering if someone has an insight
2011 2.0 cdti insignia 160 has a rough idle but only when up to temp, will get to temp with a really short drive (2/3miles) and then starts to sound rough when idle , come to a stop and turn the car off and the fans are on (again even after only driving a mile or so, drives fine and doesn’t lack power, no engine lights on, any idea?
Thank you 😊
|
|
|
|
Post by valhalla on Aug 25, 2021 18:35:27 GMT 1
Do you have a scantool, or an OBD interface tool in your toolbox?
First thing to check is that the coolant temp sensor is working - sounds like it might be going doolally when the temperature reaches normal, and that is what is also bringing the fans on.
|
|
|
|
Post by chippie on Aug 25, 2021 19:13:07 GMT 1
I had one of the earlier Insignias from new, a 2009 model. Needed a software update apparently...
I sold the car before it was fixed..Dealer said there was no fault found when it was taken in under warranty...
Really needs a scan to see whats going on...
|
|
|
|
Post by givusaclue on Aug 26, 2021 20:22:54 GMT 1
Get it scanned& the live data checked by someone who understands what they’re reading , if the dpf is clogging up it will bring the fans on very quickly
|
|
|
|
Post by remmington on Aug 26, 2021 20:55:26 GMT 1
Get it scanned& the live data checked by someone who understands what they’re reading , if the dpf is clogging up it will bring the fans on very quickly Givusaclue is right - these really do bring the fans on super quick when the DPF is filling up. -----------------------------
I don't see allot of these Insignias that are running - I only get to see them when they are dead and "spin the shells".
These 2.0 CDTi engines are the only engine I have ever seen that don't have "tabs" on the main shells. |
|
