|
Post by nickjaxe on Jul 12, 2021 10:23:15 GMT 1
Hi guys hope you don't mind me asking a question re a modern motor cycle.
its a 2020 Triumph Bonneville T100 fitted with Can Bus electrics......I am very old school and have not got upto speed with can-bus and dont want to cause damage with what I want to do to my bike.
Ok...the bike I have owned in the past have been 1960 so mods were simple.....those bike didn't have turn indicators....but my new bike does.
The prob is....with them not being self canceling I sometime forget to cancel the turn sig.....very dangerous.
I have a nice little 12v warning buzzer and would like to fit it to my bike to give me a better warning.
So my question....is there an easy way to do what I want with my can bus sys.
Nick from Cheshire.
|
|
|
Post by trickydicky on Jul 13, 2021 11:02:44 GMT 1
CANBUS is simply a module to module communication network to transmit data,actual power and ground to lights and other components is still done in the traditional way mostly (LEDs will use a different voltage) the problem is they tend to use multifunction control units instead of individual relays on modern vehicles so a wiring diagram is essential to find a good connection point
I have no experience with bikes 😕
|
|
|
Post by givusaclue on Jul 13, 2021 12:42:16 GMT 1
Hi guys hope you don't mind me asking a question re a modern motor cycle. its a 2020 Triumph Bonneville T100 fitted with Can Bus electrics......I am very old school and have not got upto speed with can-bus and dont want to cause damage with what I want to do to my bike. Ok...the bike I have owned in the past have been 1960 so mods were simple.....those bike didn't have turn indicators....but my new bike does. The prob is....with them not being self canceling I sometime forget to cancel the turn sig.....very dangerous. I have a nice little 12v warning buzzer and would like to fit it to my bike to give me a better warning. So my question....is there an easy way to do what I want with my can bus sys. Nick from Cheshire. are you sure you can't configure auto cancel from the info button menu?, i can on my 2015 explorer
|
|
|
Post by nickjaxe on Jul 13, 2021 16:51:26 GMT 1
Not seen anything in the handbook regarding self canceling Steve....
|
|