|
|
Post by sierra3dr on Nov 7, 2019 2:35:03 GMT 1
On a 2003 Focus,what would be the Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush? Would it be just a case of replacing the wishbone?
thanks
Paul
|
|
|
|
Post by remmington on Nov 7, 2019 8:16:27 GMT 1
On a 2003 Focus,what would be the Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush? Would it be just a case of replacing the wishbone? thanks Paul Yes.. New wishbone! Be careful thou - there is two sizes of ball joint taper pin for the same arm. Make sure you ask the motor factor for the right one - or take yours off first and measure it before buying the arm.  |
|
|
|
Post by sierra3dr on Nov 7, 2019 13:33:18 GMT 1
On a 2003 Focus,what would be the Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush? Would it be just a case of replacing the wishbone? thanks Paul Yes.. New wishbone! Be careful thou - there is two sizes of ball joint taper pin for the same arm. Make sure you ask the motor factor for the right one - or take yours off first and measure it before buying the arm. Thanks Remmington. Glad you mentioned the different sizes. I have microcat on my laptop, so it should reveal the correct one |
|
|
|
Post by studabear on Nov 7, 2019 15:40:43 GMT 1
I thought it's the mk2 focus that different size ball joints?
2003 will be a mk1 with a pinch bolt for the ball joint. Deffo worth getting a new bolt.
|
|
