Welshy
Apprentice
Posts: 1,119
|
Post by Welshy on Jan 23, 2013 9:23:21 GMT 1
I'm starting decorating this weekend, beginning with the bathroom. In the past, I've always used paint specifically for kitchens & bathrooms i.e. they respond well to condensation. My daughters boyfriend has new tubs of normal emulsion and reckons this should be fine. Any suggestions gratefully received
|
|
|
Post by natedog on Jan 23, 2013 9:29:19 GMT 1
If you actually get condensation on the walls, then I'd stick to a kitchen & bathroom paint. A "normal" emulsion will start to peel after a while if it is continually damp, and may get mouldy patches in it. If you are painting over existing k&b paint, don't forget to give it a rub down so the new paint can key to it
sent from my HTC using proboards android app
|
|
|
Post by sorted on Jan 23, 2013 11:49:43 GMT 1
If you actually get condensation on the walls, then I'd stick to a kitchen & bathroom paint. A "normal" emulsion will start to peel after a while if it is continually damp, and may get mouldy patches in it. If you are painting over existing k&b paint, don't forget to give it a rub down so the new paint can key to it Seconded. I've fallen into this trap before. If it's a big room with good ventilation and extraction so the walls stay mainly dry you may be OK, but if it's like most bathrooms and walls and ceiling are damp in this weather then stick to the proper stuff to avoid issues later
|
|
Welshy
Apprentice
Posts: 1,119
|
Post by Welshy on Jan 23, 2013 13:41:40 GMT 1
My bathrooms are quite small and ventilation isn't great, which is why i've used k&b paint in the past. I'll buy more paint later
|
|
|
Post by natedog on Jan 23, 2013 17:02:12 GMT 1
we've got quite a large bathroom (used to be a bedroom when the house still had an outside crapper) but it still gets visible condensation on the walls if someone has a hot shower, even with an extractor
|
|