vaux
New Member
Posts: 26
|
Post by vaux on Jan 5, 2013 16:44:22 GMT 1
Been asked to do the front brake pads on a 2008 Honda Civic R 2.0, is there anythink to look out for on these, they haven't got to be wound back with a computer have they.
|
|
french crap fanatic
Apprentice
french car specialist based in dagenham east london
Posts: 3,355
|
Post by french crap fanatic on Jan 5, 2013 18:50:22 GMT 1
yes,be carefull you dont crack the screen on the computer if you lever back the piston with it!!! ;D ;D ;D ;D ;D as far as i know straight forward and easy. on ilexa a few lads were advising to clamp off hose and open bleed screw before forcing piston back,some people have had master cylinder and abs damage when doing pads!!!! me personnally i dont do any of that. i just force the piston back very very gently and slowlyand take my time,ive not had a problem yet!!!
|
|
|
Post by Karl on Jan 5, 2013 19:11:12 GMT 1
yes,be carefull you dont crack the screen on the computer if you lever back the piston with it!!! ;D ;D ;D ;D ;D as far as i know straight forward and easy. on ilexa a few lads were advising to clamp off hose and open bleed screw before forcing piston back,some people have had master cylinder and abs damage when doing pads!!!! me personnally i dont do any of that. i just force the piston back very very gently and slowlyand take my time,ive not had a problem yet!!! Next Saturday morning you'll do one and not get a pedal again
|
|
Dai
Tea Maker
I Still love Laser Tools!!!!
Posts: 365
|
Post by Dai on Jan 5, 2013 19:25:06 GMT 1
i use a Clark pad spreader when doing front's, never had any probs yet i clamp and crack off the nipple only when doing backs as they wind back in a lot easier or if i aint got the right adaptor for my rewind tools. Unless its a VAG cause the blo*dy pipes collapse internally cause of the stupid reinforcing sleeves inside the flexi's
|
|
vaux
New Member
Posts: 26
|
Post by vaux on Jan 6, 2013 10:32:52 GMT 1
Thanks Lads Any car with abs I always clamp the flex and open the bleed nipple when pushing back the pistons, never had a problem, but seen so many that have pushed the fluid back through the system and then can't get a pedal.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 6, 2013 14:57:46 GMT 1
Thanks Lads Any car with abs I always clamp the flex and open the bleed nipple when pushing back the pistons, never had a problem, but seen so many that have pushed the fluid back through the system and then can't get a pedal. Never push old fluid back up a system,it could have been in that caliper for years ,
|
|