|
|
Post by Rhubarb on Nov 18, 2012 18:31:08 GMT 1
Hi All,
Not had much chance to use the line numbers for the Canbus on the Launch as I haven't been able to find a decent site that lists what's what.
The only site I found gave listings for VAG and was a bit vague
|
|
|
|
Post by trickydicky on Nov 18, 2012 20:07:48 GMT 1
Never used a Launch  but the CAN lines terminate at pins 6 & 14 of the DLC if thats any use for checking the resistance of the network (usually 60 ohms/40ohms on Fords) or the data transfer with a scope  |
|
|
|
Post by Rhubarb on Nov 18, 2012 20:10:39 GMT 1
Never used a Launch but the CAN lines terminate at pins 6 & 14 of the DLC if thats any use for checking the resistance of the network (usually 60 ohms/40ohms on Fords) or the data transfer with a scope Thanks for that I haven't treated myself to a Scope yet!  |
|
|
|
Post by trickydicky on Nov 18, 2012 21:25:33 GMT 1
Never used a Launch but the CAN lines terminate at pins 6 & 14 of the DLC if thats any use for checking the resistance of the network (usually 60 ohms/40ohms on Fords) or the data transfer with a scope Thanks for that I haven't treated myself to a Scope yet! Dirt cheap on ebay |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 20, 2012 10:48:45 GMT 1
|
|
|
|
Post by Rhubarb on Nov 20, 2012 22:43:25 GMT 1
Thanks Tom, I sahll have a browse through that lot |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 22, 2012 0:45:59 GMT 1
Does your launch auto select can comms Rhubarb ,or use a can adaptor ?
|
|
|
|
Post by Rhubarb on Nov 22, 2012 23:20:02 GMT 1
Does your launch auto select can comms Rhubarb ,or use a can adaptor ? Auto selects, but a screen comes up and you have to put a channel number in. That's the data I need..No rush, I've never had a need to get as deep as that yet. It helps that I keep crushing Renaults ;D |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 23, 2012 19:55:38 GMT 1
The channel numbers are realy measuring blocks id.
you may find some info on launch forum !
in fact i need some training on can as it has come on a lot .
|
|
|
|
Post by Rhubarb on Nov 23, 2012 22:28:03 GMT 1
The channel numbers are realy measuring blocks id. you may find some info on launch forum ! in fact i need some training on can as it has come on a lot . Hasn't it just! Thanks for that, yep I must sign up to the Launch forum |
|
but the CAN lines terminate at pins 6 & 14 of the DLC if thats any use for checking the resistance of the network (usually 60 ohms/40ohms on Fords) or the data transfer with a scope 
