pburg
New Member
Posts: 42
|
Post by pburg on Jun 15, 2021 1:26:23 GMT 1
hi, can anyone please tell me how to remove the internal door panel on a combo
I have taken off the window winder handle and a screw from the end of the door where it buys up to the A post. I cant get off the internal door handle and the panel at the bottom is also stuck fast with no movement what so ever.
Thanks in advance.
|
|
|
Post by valhalla on Jun 15, 2021 23:35:35 GMT 1
I cannot remember from the last time I did a Corsa-C, but generally speaking;
The internal door handle will have a split-line running through it, and you will need to prise the two halves apart. The fixings should be behind that.
As far as fixings around the door are concerned, use a broad screwdriver to gently lever the trim away from the door-frame in one place at the bottom (where it is invisible to the naked-eye) and use a bright torch to see how the trim is fixed. Most trims are just popped-in with plastic studs through the door-frame, but some German cars (the Combo included) have additional screws up through the bottom of the trim at an angle into the door, so get right under the door and look upwards carefully.
|
|
pburg
New Member
Posts: 42
|
Post by pburg on Jun 18, 2021 5:49:51 GMT 1
Thanks a lot i will ll give it a go later to day. Thanks again. :-)
|
|