pburg
New Member
Posts: 42
|
Post by pburg on Jun 23, 2017 19:55:43 GMT 1
Hi all, is there anyone here know a good sheet metalsupier in the Sheffield Rotherham area?
I am looking for a particular type of sheet, my brother and his friend worked for BRS in Sheffield many years ago and they got me some metal sheet from some old lockers they were scrapping. It was the best metal i have ever used for car bodywork.
It was on the the thickish side and absorbed welding power brilliantly and at the same time the metal folded really easily even when cold. It was best sheet i have ever used in my liife so i am hoping to get some more. Thanks for any replies.
|
|
|
Post by Roverman on Jun 24, 2017 18:53:20 GMT 1
Hi pburg If you fancy a run out to Swallownest I am having a garage clear out and may have just what you want.
|
|
|
Post by upkeep on Jun 24, 2017 19:34:25 GMT 1
Have you tried the local motor factors?
|
|
magnus
New Member
Been here a while
Posts: 66
|
Post by magnus on Jun 24, 2017 22:31:50 GMT 1
Twiggs at matlock do most stuff when it comes to steel williamtwigg.co.uk/Not really that far from sheffield !
|
|
pburg
New Member
Posts: 42
|
Post by pburg on Jun 28, 2017 17:05:12 GMT 1
Thanks for the replies everyone, i am most grateful to you all, its good to see that the comunity spirit is still here. Thanks jagman i will gladly accept your offer if it still stands. If it does, could you let me know how to get to you? Thanks. Thanks upkeep i have tried themotor factors but the s tuff i was offered was too thin and too stiff, the metal i was refering to is far superior to the sheet they offered. Thanks. Thanks magnus i will keep that in mind and call there next time i am out that way, il let you know if they do have the right sheet. Thanks.
|
|
|
Post by Roverman on Jun 28, 2017 19:51:28 GMT 1
Hi pburg Send me a private message in messages with your phone No and I will contact you with directions
|
|
pburg
New Member
Posts: 42
|
Post by pburg on Jul 1, 2017 0:58:18 GMT 1
Hi jagman, i think i have sent you a pm but i'm not sure. I am not very good with forums. If the message does not arrive i'll gladly post my phone number in the open forum. Thanks.
|
|
|
Post by Karl on Jul 1, 2017 21:27:50 GMT 1
Good to see we can help each other out on here
|
|
pburg
New Member
Posts: 42
|
Post by pburg on Jul 3, 2017 20:09:31 GMT 1
Hi pburg Send me a private message in messages with your phone No and I will contact you with directions
|
|
pburg
New Member
Posts: 42
|
Post by pburg on Jul 4, 2017 20:07:34 GMT 1
Thanks a lot jagman, your a gent for sure.
|
|
pburg
New Member
Posts: 42
|
Post by pburg on Jul 4, 2017 20:17:38 GMT 1
Good to see we can help each other out on here I'll second that, there are some very nice people here on this forum for sure.
|
|
|
Post by Roverman on Jul 5, 2017 18:02:54 GMT 1
Nice to be able to help some one out, with bits and pieces I shall never use again, slowly getting rid of my Vauxhall bits and replacing them with Jag bits
|
|
|
Post by valhalla on Jul 6, 2017 0:24:27 GMT 1
Nice to be able to help some one out, with bits and pieces I shall never use again, slowly getting rid of my Vauxhall bits and replacing them with Jag bits Don't throw the welder away just yet! Not least for the X-type...
|
|
|
Post by Roverman on Jul 6, 2017 18:19:55 GMT 1
|
|