|
|
Post by Rhubarb on May 29, 2015 12:36:18 GMT 1
blo*dy thing, the bottom rad hose clip leaked this morning..
Sorted that with a new clip then the water pump pissed out!
Getting a pump and a stat tomorrow..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 29, 2015 13:12:34 GMT 1
blo*dy thing, the bottom rad hose clip leaked this morning.. Sorted that with a new clip then the water pump pissed out! Getting a pump and a stat tomorrow.. Tight wad,  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 29, 2015 13:14:04 GMT 1
And get a good quality head gasket  |
|
|
|
Post by Noberator on May 29, 2015 13:33:24 GMT 1
blo*dy thing, the bottom rad hose clip leaked this morning.. Sorted that with a new clip then the water pump pissed out! Getting a pump and a stat tomorrow.. Tight wad, Isn't she just.   Should have changed the water pump when you did the cambelt.  |
|
|
|
Post by Rhubarb on May 29, 2015 18:24:06 GMT 1
blo*dy thing, the bottom rad hose clip leaked this morning.. Sorted that with a new clip then the water pump pissed out! Getting a pump and a stat tomorrow.. Tight wad, Bollox |
|
|
|
Post by Rhubarb on May 29, 2015 18:24:34 GMT 1
And get a good quality head gasket No problem with h/g  |
|
|
|
Post by Rhubarb on May 29, 2015 18:24:53 GMT 1
Tight wad, Isn't she just. Should have changed the water pump when you did the cambelt. Bollox again |
|
|
|
Post by Noberator on May 29, 2015 20:19:04 GMT 1
Isn't she just. Should have changed the water pump when you did the cambelt. Bollox again  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 29, 2015 22:35:19 GMT 1
Tight wad, Bollox  it does look a nice tidy vts though. |
|
|
|
Post by Rhubarb on May 30, 2015 17:06:16 GMT 1
Wasn't the pump after all!
The bottom hose had touched the crank pulley and worn a ting hole in it..
So I removed it, bitch of a job, and cut the hose in two...Chopped up a spark plug socket and used that as a bridge with 2 jubilee clips..
It'll do for now until I can get hold of a hose..
Also fitted the new stat and housing..
|
|
|
|
Post by studabear on May 30, 2015 17:53:41 GMT 1
You can buy proper hose joiners on ebay cheaply, with a lip on each end. I had to use a few when I built the escort.
|
|
|
|
Post by Rhubarb on May 30, 2015 23:42:50 GMT 1
|
|
Should have changed the water pump when you did the cambelt. 
it does look a nice tidy vts though. 
