Po132 could mean a faulty O2 sensor but before you start replacing parts you need to have a look on live data as a rich mixture could also give you this code.
Po132 could mean a faulty O2 sensor but before you start replacing parts you need to have a look on live data as a rich mixture could also give you this code.
thanks mayfly im getting a live data check done this morning.
thanks to everyone who has commented its much appreciated
Po132 could mean a faulty O2 sensor but before you start replacing parts you need to have a look on live data as a rich mixture could also give you this code.
thanks mayfly im getting a live data check done this morning.
thanks to everyone who has commented its much appreciated
cheers dave
Be nice if you could post results of tests from data, they can vary from scan tool to scan tool on honda,s..... More confused .com for me,
That data wont tell you much regarding your fault , you should not clear codes before looking at and recording freeze frame ,is this fault intermittant ? without going too much into it if this is the only code you are getting and if thats all you have for diagnostics i would tend to believe the ecu . to get a proper diagnostic you realy need enhanced data ..
Post by ravindave08 on Dec 17, 2014 15:09:32 GMT 1
Thanyou for the replys
and yes its intermittent i cleared the codes the other day and the light came back on then within 24 hours the light went back out thats happened 3 times now and everytime its the same code